Stainless steel stud bolts, stainless steel U-bolts, stainless steel bolts custom


Company Name: Dongtai Huayite Steel Products Factory

Phone: 0515-85926750

Mobile: 15851034545, 13805110750


Fax: 0515-85520750

Address: No. 1, Kaizhuang Industrial Park, Dongtai City, Jiangsu Province


Stainless steel fastener manufacturers

Your current location: Home >> Products >> full thread bar

Stainless steel fastener manufacturers

  • Detailed

Stainless steel fastener manufacturers are trustworthy, innovation and equipment transformation are changing with each passing day, and the production scale is gradually expanding. A set of anchor bolts, industrial and mining accessories, and a wealth of first-line technicians have been formed. With the continuous deepening of the market economy and the continuous improvement of processing technology, our factory has the experience of manufacturing technology to create a group of engineers and technicians of stainless steel fasteners.

The company has complete testing methods and advanced production technology, and is available 24 hours a day. There is a complete set of solutions for detecting quality problems for anchor bolts. If the foundation has been cast and the bolts are too large, remove them and reinstall them, ie the dimensions of the construction seats. Four grade stainless steel. Corrosion resistance and mechanical properties are similar. The starting point for the selection of gold-carved stainless steel is 302, 303, 304, 305. The so-called "18-8" type Austria is 650~700 °C. The mechanical properties are even, even as the degree increases. Used as a high-strength, heat-resistant, corrosion-resistant stainless steel screw.

The gasket is a component that is filled between the connector and the nut. Usually, it is a flat metal ring for protecting the surface of the connecting member from the pressure of the nut and the dispersing nut to the connecting member. Washers are divided into several types depending on their function. For example: flat washers - Class C, large washers - Class A and Class C, small washers - steel high strength washers, I-steel square bevel washers, channel square bevel washers, standard spring washers, light washers, heavy duty springs Washers, single ear stop washers, binaural stop washers, round nut stop washers, etc. Ordinary gaskets are as follows: Flat washers usually use flat washers in the joints. One is soft and the other is hard and brittle. Its main function is to increase the contact area, disperse the pressure, and prevent the texture from softening and crushing!

Stainless steel fastener manufacturers have thinned bolt diameters and welded with 2 to 3 steel plates for reinforcement. If the device is placed on a foundation, it is inconvenient to move. The base is placed on the anchor bolt and the upper part is tightened with a nut. Tighten the strength of the nut to extend the red color of the bolt. Extend it. The extension method uses two stacks of pads as the support, followed by a steel plate with a hole in the center. Extension: Place the stainless steel screws inside, pay attention to the test box seal, salt spray concentration ratio and test chamber temperature and test time. From the beginning of the stainless steel fastener to the red rust time, it is the time of the salt spray resistance test.

Stainless steel fastener manufacturers

  • Service
  • Tel
  • Mess
  • Web
  • Advisory